'It's not just another stupid UCI rule' - CPA in favour of ban on turned-in brake levers
Adam Hansen explains the danger of extreme lever positions
Following the decision by the UCI to ban turned-in brake levers in 2024, the president of the CPA rider's association Adam Hansen, has told Cyclingnews he is in favour of the new rule and explained why it is important for rider safety.
Speaking exclusively to Cyclingnews, the former Australian revealed that in his role at the CPA, an organisation whose primary aim is to protect the rights and interests of riders, he worked with the UCI's Head of Road Cycling and Innovation, Michael Rogers, to come to the decision.
"I surveyed the riders, I wanted to know their feedback because some riders were concerned and some riders in the peloton saw crashes. Some riders were going pretty extreme with it." Hansen said of the turned-in levers, his survey done during the summer at major races with a significant number of riders.
Alongside rider concerns, Rogers' work with handlebar and carbon fibre cockpit manufacturers. They provided the greatest case in favour of the ban because turning in levers can change the point of contact of the levers and apparently put extra stress on the bars, which can cause them to fail.
"He actually got some research from the manufacturers," Hansen said of Rogers. "At 10 degrees and at 15 degrees inwards, it caused extra stress on the handlebars. He witnessed some handlebars cracked and we saw the images of these handlebars with cracks in them.
"There's a lot of extra stress when they're not put in the correct position designed by the manufacturer. Manufacturers design the levers in a sense where they're meant to sit straight on the handlebars. It was never the manufacturers' idea that they'd be put at an incline."
The risk of handlebar damage and subsequent crashes could lead to a fatality, and as a result Hansen is strongly in favour of the new UCI rule.
Get The Leadout Newsletter
The latest race content, interviews, features, reviews and expert buying guides, direct to your inbox!
"What they're actually trying to do is making sure that riders and mechanics are not putting the brake levers past the stress point recommendations. It's done from a safety point of view. It's not just another stupid UCI rule. This is a valid rule.
"What worries me is a rider in the middle of a race, let's say he sprints uphill and he's on his brake levers [hoods]. He's sprinting uphill, and that causes a crack but you don't really feel it because it could happen at the bottom of the connection. And then at the end of the race, he's sprinting on the [drops], sprinting underneath the crack. You can have a fatal accident. And not just you but you could take down other riders."
Notably, among Hansen's rider survey, some had come out in favour of the ergonomics of the position, and he praised Rogers and the UCI for listening to the riders on this point, reaffirming that it won't be a total ban. There will be a limit to the angle brake lever can be turned inwards, with UCI officials given a specific device to carry out rapid checks at races.
"We haven't got the percentage, that's not out yet," Hansen said.
"I think Michael is still waiting on some other results from the other manufacturers of the extra stress it causes. Based on that, they'll work out a percentage of how [far] in inwards they can be bent."
Hanson pointed out that using flared handlebars could be a way to adhere to the new rules while maintaining an inward lever position.
"If their handlebars are flared out, let's say 10 degrees, and the levers are mounted in line – so not bent, but in line with the 10 degrees – then the levers would be 10 degrees inwards from the top of the bars," Hansen suggested.
It's this point that leads onto the second part of the UCI's original press release, which is that from 2025, it wouldn't simply be a UCI ban, but a requirement to work with manufacturers to follow their suggestions and guidelines.
If a manufacturer designs a bar with a significant flare, then a rider could, in theory, have their brake levers at the same inward angle so long as the manufacturer approves it.
"The UCI are listening to the manufacturer, which they should, because the manufacturer knows the failing point of their handlebars more than anyone else," Hansen pointed out.
Josh is Associate Editor of Cyclingnews – leading our content on the best bikes, kit and the latest breaking tech stories from the pro peloton. He has been with us since the summer of 2019 and throughout that time he's covered everything from buyer's guides and deals to the latest tech news and reviews.
On the bike, Josh has been riding and racing for over 15 years. He started out racing cross country in his teens back when 26-inch wheels and triple chainsets were still mainstream, but he found favour in road racing in his early 20s, racing at a local and national level for Somerset-based Team Tor 2000. These days he rides indoors for convenience and fitness, and outdoors for fun on road, gravel, 'cross and cross-country bikes, the latter usually with his two dogs in tow.
- Stephen FarrandHead of News